NSN: 5990-00-001-1766
Synchros and Resolvers
SYNCHRO,CONTROL TRANSFORMER
- No manufacturer data was found.
SYNCHRO,CONTROL TRANSFORMER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Shaft Slot Depth
0.0250 inches minimum single shaft and 0.0350 inches maximum single shaft
-
Pilot Length
0.0370 inches minimum and 0.0430 inches maximum
-
Shaft Slot Width
0.0200 inches minimum single shaft and 0.0300 inches maximum single shaft
-
Maximum Temp Rise
12.0 deg celsius
-
Undercut Width
0.0590 inches minimum and 0.0650 inches maximum
-
Stator Dc Resistance In Ohms
24.00 nominal
-
Mounting Surface To Terminal End Distance
1.5630 inches maximum
-
Plus J Zso Reactance In Ohms
114.00 nominal
-
Transformation Ratio
2.203 rotor to stator nominal
-
Stator Input Electrical Power Rating
210.0 milliwatts nominal
-
Plus J Zro Reactance In Ohms
690.00 nominal
-
Body Size
8
-
Zso Resistance In Ohms
25.00 nominal
-
Stator Input Current Rating
87.0 milliamperes nominal
-
Shaft Length
0.5470 inches minimum single shaft and 0.5770 inches maximum single shaft
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
22.00 output
-
Terminal Type And Quantity
5 turret
-
Terminal Location
rear
-
Actuator Friction Torque At Minus 55 Deg Celsius
16.0 centimeter-grams nominal
-
Overall Length
2.1400 inches maximum
-
Electrical Error Angular Range In Minutes
-5.0/+5.0
-
Stator Input Voltage Rating In Volts
11.8 nominal
-
Shaft Type
round, slotted single shaft
-
Frequency In Hertz
400.0 nominal
-
Body Material
aluminum or corrosion resistant steel
-
Flange Thickness
0.0590 inches minimum and 0.0650 inches maximum
-
Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams nominal
-
Flange Diameter
0.7470 inches minimum and 0.7500 inches maximum
-
Rotor Dc Resistance In Ohms
143.00 nominal
-
Undercut Diameter
0.6880 inches minimum and 0.6910 inches maximum
-
Phase Shift Angle In Deg
10.000 input to output nominal
-
Zro Resistance In Ohms
175.00 nominal
-
Maximum Total Null Voltage Output In Millivolts Per Volt
30.00
-
Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
-
Body Style
standard round a
-
Shaft Diameter
0.0895 inches minimum single shaft and 0.9000 inches maximum single shaft
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.