NSN: 5990-00-015-0444
Synchros and Resolvers
SYNCHRO,RECEIVER
- No manufacturer data was found.
SYNCHRO,RECEIVER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Body Style
a3 standard round c
-
Shoulder Diameter
1.3120 inches nominal
-
Pilot Diameter
0.8750 inches nominal
-
Overall Length
3.1340 inches maximum
-
Undercut Width
0.0780 inches nominal
-
Fragility Factor
moderately rugged
-
Rotor Input Voltage Rating In Volts
115.0 nominal
-
Stator Dc Resistance In Ohms
400.00 nominal
-
Maximum Total Null Voltage Output In Millivolts Per Volt
500.00
-
Receiver Error Angular Range In Minutes
-45.0/ 45.0
-
Actuator Friction Torque At Minus 55 Deg Celsius
0.05 inch-ounces (ounce-inches) nominal
-
Alignment Hole Quantity
4
-
Pilot Length
0.0400 inches nominal
-
Shoulder Length
0.1320 inches nominal
-
Shaft Thread Class
2a single shaft
-
Alignment Hole Depth
0.1120 inches nominal
-
Alignment Hole Bolt Circle Diameter
1.1000 inches nominal
-
Shaft Nominal Thread Size
0.1872 inches single shaft
-
Terminal Type And Quantity
5 screw
-
Body Material
aluminum alloy
-
Flange Diameter
1.4370 inches nominal
-
Flange Thickness
0.0930 inches nominal
-
Undercut Diameter
1.3120 inches nominal
-
Body Size
15
-
Frequency In Hertz
60.0 nominal
-
Rotor Input Current Rating
200.0 milliamperes nominal
-
Rotor Input Electrical Power Rating
3.1 watts nominal
-
Zss Resistance In Ohms
920.00 nominal
-
Rotor Dc Resistance In Ohms
470.00 nominal
-
Phase Shift Angle In Deg
13.000 input to output minimum and 14.000 input to output maximum
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
50.00 input
-
Electrical Error Angular Range In Minutes
-6.0/ 6.0
-
Spline Tooth Quantity
21 single shaft
-
Actuator Friction Torque At Plus 25 Deg Celsius
0.03 inch-ounces (ounce-inches) nominal
-
Mounting Surface To Terminal End Distance
2.3910 inches maximum
-
Spline Tooth Diametral Pitch
120 single shaft
-
Shaft Thread Series Designator
unc single shaft
-
Shaft Thread Direction
right-hand single shaft
-
Terminal Location
rear
-
Shaft Type
spline w/threads single shaft
-
Transformation Ratio
0.783 rotor to stator nominal
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.