FHL29G-002

Technical Characteristics

• ~1

  type data on certain environmental and perform

• Test Data Document

  81349-mil-f-19207/18 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general

• Body Style

  panel mounted type

• Mounting Hole Diameter

  0.151 inches minimum and 0.161 inches maximum

• Voltage In Volts

  250.0

• Mounting Hole Style

  2 bushing mounting w/2 holes

• Contact Surface Treatment

  silver plated, qq-s-365

• Environmental Protection

  dripproof

• Interruption Indicator Method

  incandescent lamp

• Fuse Terminal Type Accommodated

  ferrule

• Length From Front Protrusion To Mounting Surface

  0.798 inches minimum and 0.828 inches maximum

• Overall Height

  1.812 inches minimum and 1.817 inches maximum

• Current Carrying Rating In Amps

  30.0

• Center To Center Distance Between Outside Mounting Holes Along Width

  0.933 inches minimum and 0.943 inches maximum

• Mounting Hole Quantity

  2

• Center To Center Distance Between Bushing Holes

  0.795 inches minimum and 0.805 inches maximum

• Fuse Accommodation Quantity

  2

• Bushing Hole Diameter

  0.869 inches minimum and 0.879 inches maximum

• Center To Center Distance Between Keyway And Bushing Hole

  0.464 inches minimum and 0.474 inches maximum

• Overall Length

  3.750 inches minimum and 4.000 inches maximum

• Accommodated Ferrule Diameter

  0.250 inches nominal

• Contact Material

  any acceptable

• Resistor Rating

  330.0 ohms

• Body Material

  plastic, diallyl phthalate, mil-m-14, type sdg

• Indicating Lamp Voltage Range In Volts

  +23.0/+33.0

• Terminal Type And Quantity

  4 threaded stud

• Overall Width

  1.180 inches minimum and 1.185 inches maximum

• Screw Thread Diameter

  0.164 inches nominal

• Accommodated Fuse Length

  1.250 inches nominal

• Screw Thread Quantity Per Inch

  32.0