10876-1REVC

Technical Characteristics

• Shaft Diameter

  0.1245 inches minimum and 0.1247 inches maximum

• Tap Location From Ccw Terminal Per Section In Ohms

  17500.0 4th section

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Pilot Diameter Runout

  0.001 inches

• Mounting Lip Diameter

  0.7750 inches nominal

• Shaft Style

  round

• Function Conformity Tolerance Per Section

  -0.50/+0.50 1st section

• Fixed Tap Quantity Per Section

  1 all sections

• Maximum Running Torque

  0.90 inch-ounces

• Shaft Radial Play

  0.001 inches

• Body Style

  cylindrical servo mounted

• Maximum Starting Torque

  1.00 inch-ounces

• Tap Location From Ccw Terminal Per Section In Ohms

  4375.0 2nd section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Electrical Resistance Per Section

  50.0 percent, rated amperes c drop siding

• Tap Location From Ccw Terminal Per Section In Ohms

  4375.0 3rd section

• Function Conformity Tolerance Per Section

  -0.50/+0.50 5th section

• Tap Location From Ccw Terminal Per Section In Ohms

  6250.0 1st section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Body Length

  2.593 inches maximum

• Actuator Type

  single shaft

• Shaft End Play

  0.002 inches

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Effective Electrical Rotation In Deg Angular Rotation

  180.0 nominal

• Electrical Resistance Per Section

  35.0 percent, rated amperes c and better v.g. stepping

• Mounting Method

  clamp ring

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Tolerance Per Section

  -0.55/+0.55 2nd section

• Electrical Resistance Per Section

  8.75 percent, rated amperes c and better industrial clears

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Conformity Tolerance Per Section

  -0.55/+0.55 3rd section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  90.0 all sections

• Terminal Type And Quantity

  20 turret

• Tap Location Tolerance Per Section

  -5.0/+5.0 ohms all sections

• Function Conformity Per Section

  all sections terminal base linearity

• Shaft Length

  0.375 inches nominal

• Power Dissipation Rating Per Section In Watts

  1.0 free air all sections

• Undercut Width

  0.0570 inches minimum

• Terminal Location

  radially positioned over more than half the circumference

• Undercut Diameter

  0.748 inches minimum and 0.755 inches maximum

• Electrical Resistance Per Section

  8.75 percent, rated amperes c and better select

• Electrical Resistance Per Section

  12.5 percent, rated amperes c and better finish

• Test Data Document

  06481-910017 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Shaft Bearing Type

  ball

• Function Characteristic Per Section

  all sections linear

• Overall Length

  2.593 inches maximum

• Section Quantity

  5

• Body Diameter

  0.775 inches nominal

• Tap Location From Ccw Terminal Per Section In Ohms

  25000.0 5th section

• Function Conformity Tolerance Per Section

  -0.30/+0.30 4th section

• Pilot Diameter

  0.7490 inches minimum and 0.7590 inches maximum