7609-1417-0

Technical Characteristics

• Body Diameter

  any acceptable

• Rotary Actuator Travel In Angular Deg

  3636.0 minimum and 3641.0 maximum

• Section Quantity

  2

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Body Style

  4b cylindrical servo mounted

• Undercut Diameter

  1.874 inches minimum and 1.875 inches maximum

• Shaft Radial Play

  0.001 inches

• Actuator Type

  single shaft

• Mounting Method

  clamp ring and threaded hole

• Screw Thread Diameter

  0.164 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0 to 5.0 all sections

• Design Control Reference

  900612

• Shaft Style

  1c round

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum

• Terminal Location

  radially positioned over more than half the circumference

• Maximum Stop Torque

  550.00 inch-ounces

• Contact Arm Electrical Off Position

  fully ccw

• Maximum Running Torque

  1.80 inch-ounces

• Pilot Length

  0.06250 inches nominal

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Undercut Width

  0.06250 inches nominal

• Reliability Indicator

  not established

• Iii Overall Length

  5.968 inches nominal

• Screw Thread Series Designator

  unc

• Mounting Lip Depth

  0.09375 inches nominal

• Actuator Travel Control Feature

  stops

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Shaft Length

  1.532 inches minimum and 1.594 inches maximum

• Pilot Diameter

  0.74900 inches minimum and 0.75000 inches maximum

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Iii Overall Diameter

  2.000 inches nominal

• Mounting Facility Quantity

  3

• Standard Taper Curve Per Section

  a single section

• Body Length

  4.281 inches maximum

• Fixed Tap Quantity Per Section

  1 1st section 1 2nd section

• Screw Thread Quantity Per Inch

  32.0

• The Manufacturers Data

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Maximum Starting Torque

  2.60 inch-ounces

• Terminal Type And Quantity

  8 tab, solder lug

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0 to 20.0 single section

• Manufacturers Code

  05257

• Angle Of Mounting Hole In Deg

  30.0

• Electrical Resistance Per Section

  1.000 kilohms all sections

• Mounting Lip Diameter

  2.00000 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  2666.0 1st section 2666.0 2nd section

• Tap Location Tolerance Per Section

  -2.0 to 2.0 deg angular rotation single section

• Shaft End Play

  0.00500 inches