932037+20

Technical Characteristics

• ~1

  data on certain environmental and performanc

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Section Quantity

  1

• Fragility Factor

  moderately delicate

• Lateral Distance Between Mounting Hole Centers

  1.000 inches nominal

• Terminal Type And Quantity

  3 pin

• Overall Width

  0.180 inches minimum and 0.200 inches maximum

• Mounting Method

  unthreaded hole

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Standard Taper Curve Per Section

  a single section

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Mounting Facility Quantity

  2

• Shaft Length

  0.060 inches minimum and 0.080 inches maximum

• Actuator Type

  single shaft

• Mounting Hole Diameter

  0.093 nominal inches

• Specification/Standard Data

  81349-mil-r-39015/1 government specification

• Reliability Indicator

  established

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Maximum Running Torque

  0.10 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Overall Length

  1.300 inches minimum and 1.340 inches maximum

• Terminal Location

  lower adjacent side single row

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary quality

• Center To Center Distance Between Terminals

  0.890 inches minimum and 0.910 inches maximum

• Body Length

  1.240 inches minimum and 1.260 inches maximum

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better flooring

• Body Height

  0.300 inches minimum and 0.330 inches maximum

• Maximum Starting Torque

  5.00 inch-ounces

• Shaft Style

  round, slotted

• Body Style

  rectangular w/mounting holes/slots

• Terminal Length

  0.463 inches minimum and 0.531 inches maximum

• Reliability Failure Rate Level In Percent

  1.000

• Test Data Document

  81349-mil-r-39015 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Overall Height

  0.300 inches minimum and 0.330 inches maximum

• Shaft Diameter

  0.095 inches minimum and 0.115 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.690 nominal mils and 0.710 nominal centimeters