16679

Technical Characteristics

• Reliability Indicator

  not established

• Overall Length

  1.516 inches maximum

• Body Diameter

  1.156 inches maximum

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  312.0 nominal

• Section Quantity

  1

• Shaft Diameter

  0.248 inches minimum and 0.250 inches maximum

• Shaft Length

  0.875 inches nominal

• Mounting Bushing Length

  0.375 inches nominal

• Body Length

  0.625 inches maximum

• Overall Diameter

  1.484 inches maximum

• Maximum Running Torque

  1.00 inch-ounces (ounce-inches)

• Electrical Resistance Per Section

  500.0 kilohms single section

• ~1

  section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Resistance Tolerance Per Section In Percent

  m10.0/p10.0 single section

• Criticality Code Justification

  feat

• Terminal Type And Quantity

  3 tab,solder lug

• Maximum Starting Torque

  6.00 inch-ounces (ounce-inches)

• Maximum Stop Torque

  192.00 inch-ounces (ounce-inches)

• Nonturn Device Location

  at 9 oclock

• Nonturn Device Radius

  0.531 inches nominal

• Mechanical Backlash In Deg Angular Rotation

  1.5

• Screw Thread Diameter

  0.375 inches nominal

• Screw Thread Series Designator

  unef

• Screw Thread Quantity Per Inch

  32.0

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Method

  standard bushing w/shaft seal

• Rotary Actuator Travel In Angular Deg

  312.0 nominal

• Resistance Temp Characteristic Range Per Section In Percent

  p0.0/p8.0 -55 deg celsius single section and p0.0/p4.0 -25 deg celsius single section and p0.0/p2.0 0 deg celsius single section and p0.0/p3.0 25 deg celsius single section and m3.0/p3.0 85 deg celsius single section and p0.0/p6.0 120 deg celsius single

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Actuator Travel Control Feature

  stops

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Standard Taper Curve Per Section

  a single section

• Special Features

  item must comply with requirements of defense electronics supply center production standard no. l00990