931-5000-5000P0RM5PCT

Technical Characteristics

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better industrial clears

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Function Conformity Per Section

  all sections absolute linearity

• Undercut Diameter

  1.865 inches minimum and 1.875 inches maximum

• Shaft Radial Play

  0.002 inches

• Reliability Indicator

  not established

• Pilot Diameter Runout

  0.00200 inches

• Pilot Length

  0.06200 inches nominal

• Test Data Document

  10001-2877112 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Lateral Runout

  0.003 inches

• Maximum Starting Torque

  4.00 inch-ounces

• Standard Taper Curve Per Section

  a all sections

• Mounting Method

  clamp ring

• Shaft End Play

  0.00250 inches

• Terminal Location

  radially positioned over less than half the circumference

• Shaft Runout

  0.001 inches

• Pilot Diameter

  1.87400 inches minimum and 1.87500 inches maximum

• Terminal Type And Quantity

  8 turret

• Undercut Width

  0.07300 inches minimum and 0.08300 inches maximum

• Overall Length

  5.074 inches minimum and 5.156 inches maximum

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -150.0/+150.0 all sections

• Body Length

  4.240 inches minimum and 4.250 inches maximum

• Body Diameter

  2.021 inches minimum and 2.031 inches maximum

• Electrical Resistance Per Section

  5.000 percent, rated amperes c and better finish

• Features Provided

  nonmetallic shaft

• Special Features

  external fixed resistor mtd between terminal 3 and 4 both sections

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Function Conformity Tolerance Per Section

  -0.05/+0.05 all sections

• Shaft Diameter

  0.250 inches nominal

• Body Style

  cylindrical servo mounted

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Mounting Lip Depth

  0.09300 inches nominal

• Mounting Lip Diameter

  1.99000 inches minimum and 2.00500 inches maximum

• Overall Diameter

  2.380 inches minimum and 2.391 inches maximum

• Shaft Length

  0.750 inches nominal

• Maximum Running Torque

  2.00 inch-ounces

• Rotary Actuator Travel In Angular Deg

  3680.0 minimum

• Actuator Travel Control Feature

  stops

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  5.0 free air all sections

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Function Characteristic Per Section

  all sections linear