78WB-430

Technical Characteristics

• Shaft Diameter

  0.124 inches minimum and 0.125 inches maximum

• Function Characteristic Per Section

  all sections equation

• Section Quantity

  2

• Body Style

  cylindrical bushing mounted

• Shaft Style

  round, slotted

• Terminal Type And Quantity

  6 tab, solder lug

• Test Data Document

  35351-151333 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Body Diameter

  0.890 inches maximum

• Nonturn Device Location

  at 12 oclock

• Maximum Running Torque

  6.00 inch-ounces

• Nonturn Device Radius

  0.312 inches nominal

• Power Dissipation Rating Per Section In Watts

  0.25 free air all sections

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Electrical Resistance Per Section

  665.0 ohms all sections

• Function Conformity Per Section

  all sections absolute conformity

• Maximum Starting Torque

  6.00 inch-ounces

• Body Length

  0.765 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 all sections

• Mounting Method

  standard bushing

• Terminal Location

  radially positioned over less than half the circumference

• Maximum Stop Torque

  32.00 inch-ounces

• Shaft Length

  0.656 inches minimum and 0.718 inches maximum

• Mounting Bushing Length

  0.656 inches minimum and 0.718 inches maximum

• Screw Thread Diameter

  0.250 inches nominal

• Function Conformity Tolerance Per Section

  -1.00/+1.00 all sections

• Screw Thread Quantity Per Inch

  32.0