7609-1445-0

Technical Characteristics

• Reference Number Differentiating Characteristics

  as differentiated by special test features

• Terminal Type And Quantity

  3 tab,solder lug

• Special Test Features

  mil-q-21549b-sp24-1

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  m20.0/p20.0 single section

• Function Characteristic Per Section

  single section linear

• Actuator Travel Control Feature

  continuous motion

• Function Conformity Per Section

  single section independent linearity

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum

• Features Provided

  nonmetallic shaft

• Terminal Location

  radially positioned over less than half the circumference

• Screw Thread Quantity Per Inch

  32.0

• Screw Thread Series Designator

  unc

• Lateral Runout

  0.003 inches

• Shaft End Play

  0.00500 inches

• Maximum Stop Torque

  400.00 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum

• Actuator Type

  double ended shaft

• Mounting Hole/Stud Circle Diameter

  1.250 inches nominal

• Mounting Lip Diameter

  1.8750 inches nominal

• Shaft Diameter

  0.250 inches nominal

• Angle Of Mounting Hole In Deg

  90.0

• Body Diameter

  2.000 inches nominal

• Undercut Diameter

  1.830 inches nominal

• Pilot Diameter

  0.7500 inches maximum

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 single section

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Function Conformity Tolerance Per Section

  m0.01/p0.01 single section

• Mounting Method

  threaded hole

• Mounting Facility Quantity

  3

• Screw Thread Diameter

  0.164 inches nominal

• Shaft Radial Play

  0.001 inches

• Pilot Diameter Runout

  0.00100 inches

• Shaft Runout

  0.001 inches

• Maximum Running Torque

  0.90 inch-ounces (ounce-inches)

• Maximum Starting Torque

  1.30 inch-ounces (ounce-inches)

• Shaft Bearing Type

  ball

• Mounting Lip Depth

  0.0620 inches nominal

• Body Length

  2.125 inches nominal

• Shaft Length

  0.625 inches nominal

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Undercut Width

  0.0620 inches nominal

• Pilot Length

  0.0620 inches nominal

• Section Quantity

  1