160C145918

Technical Characteristics

• Unthreaded Mounting Hole Diameter

  0.218 inches nominal single mounting facility

• Main Contact Maximum Voltage Rating In Volts

  200.0 ac

• Environmental Protection

  shock resistant and vibration resistant

• Center To Center Distance Between Mounting Facilities Parallel To Length

  6.000 inches nominal single mounting facility

• Auxiliary Contact Maximum Voltage Rating In Volts

  200.0 ac and 28.0 dc

• Duty Type

  continuous

• Auxiliary Contact Load Current Rating At Maximum Rated Voltage

  5.0 amperes ac resistive load

• Overall Height

  4.900 inches maximum

• Nonpile-Up Main Contact Arrangement

  3 pole, double throw, one position momentary

• Main Contact Load Current Rating At Maximum Rated Voltage

  225.0 amperes ac resistive load

• Overall Width

  3.660 inches maximum

• Operating Voltage Rating And Type At Specified Temp

  30.0 volts dc 25 deg celsius all windings

• Special Features

  aux contact terminals included in connector

• Features Provided

  coil voltage suppression and latching contacts

• Terminal Type And Quantity

  9 threaded stud contacts

• Time Delay

  0.02 seconds nominal fixed release time

• Coil Quantity

  2

• Auxiliary Contact Load Current Rating At Maximum Rated Voltage

  1.0 amperes ac lamp load

• Terminal Type And Quantity

  1 connector, plug energizing element

• Nonpile-Up Auxiliary Contact Arrangement

  2 pole, single throw, normally open, momentary action and 3 pole, double throw, one position momentary and 3 pole, single throw, normally closed, momentary action

• Winding Quantity

  2

• Nominal Operating Current Rating And Type

  5.0 amperes dc all windings

• Overall Length

  6.560 inches maximum

• Time Delay

  0.025 seconds nominal fixed operate time

• Center To Center Distance Between Mounting Facilities Parallel To Width

  3.093 inches nominal single mounting facility

• Mounting Facility Pattern

  rectangular single mounting facility

• Mounting Facility Type And Quantity

  4 unthreaded hole single mounting facility