MIL-DTL-9395/10

Technical Characteristics

• Test Data Document

  81349-mil-s-9395 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• ~1

  data on certain environmental and performance

• Style Designator

  cylindrical w/mounting lugs

• Overall Length

  2.870 inches maximum

• Terminal Type

  connector, receptacle

• Media For Which Designed

  liquid

• Overall Width

  1.939 inches nominal

• Specification/Standard Data

  81349-mil-s-9395/10 government specification

• Nonpile-Up Contact Arrangement

  1 pole, single throw, normally open, momentary action

• Contact Stimulus Rating

  150.00 actuation point nominal pounds per square inch and 50.00 deactuation point nominal pounds per square inch

• Body Length

  1.162 inches maximum

• Unthreaded Mounting Hole Diameter

  0.219 inches nominal

• Operating Temp Rating

  -53.9 deg celsius minimum and 176.6 deg celsius maximum

• Distance Between Mounting Facility Centers

  1.521 inches minimum and 1.541 inches maximum

• Outside Diameter

  0.431 inches minimum single connection and 0.433 inches maximum single connection

• Pressure Connector Type

  grooved, unthreaded external single connection

• Body Diameter

  0.994 inches minimum and 0.996 inches maximum

• Proof Pressure

  800.00 pounds per square inch

• Mounting Method

  unthreaded hole

• Pressure Switch Type

  gage

• Sensing Element Burst Pressure

  1200.00 pounds per square inch

• Contact Load Current Rating

  10.0 amperes resistive load single voltage and 10.0 amperes inductive load single voltage and 5.0 amperes lamp load single voltage

• Contact Adjustability

  deactuation point not adjustable and actuation point not adjustable

• Contact Voltage Rating In Volts

  28.0 dc at sea level single voltage

• Mounting Facility Pattern

  two position in-line

• Contact Action Stimulus

  increase