3200-851

Technical Characteristics

• Shaft Diameter

  0.124 inches minimum and 0.125 inches maximum

• Terminal Location

  longitudinally positioned on the circumference

• Maximum Running Torque

  0.60 inch-ounces

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Shaft End Play

  0.00500 inches

• Test Data Document

  56232-739457 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Bearing Type

  ball

• Pilot Diameter

  0.6240 inches minimum and 0.6250 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Diameter

  0.8750 inches nominal

• Features Provided

  nonmetallic shaft

• Mounting Lip Depth

  0.0620 inches nominal

• Maximum Starting Torque

  0.75 inch-ounces

• Shaft Style

  round

• Terminal Type And Quantity

  3 tab, solder lug

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Shaft Radial Play

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Method

  clamp ring

• Lateral Runout

  0.005 inches

• Shaft Runout

  0.001 inches

• Electrical Resistance Per Section

  1.000 kilohms single section

• Body Length

  1.562 inches minimum and 1.602 inches maximum

• Body Style

  cylindrical servo mounted

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Shaft Length

  0.625 inches nominal

• Actuator Travel Control Feature

  clutch

• Pilot Diameter Runout

  0.00150 inches

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -250.0/+250.0 single section

• Function Characteristic Per Section

  single section linear

• Body Diameter

  0.875 inches nominal

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Undercut Diameter

  0.624 inches minimum and 0.625 inches maximum