CP35-9-57D15A2C

Technical Characteristics

• Terminal Type And Quantity

  12 solder stud

• Tap Location From Ccw Terminal Per Section In Ohms

  5000.0 single section

• Fixed Tap Quantity Per Section

  1 single section

• Function Conformity Per Section

  single section independent linearity

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  80.0 single section

• Function Conformity Tolerance Per Section

  m0.50/p0.50 single section

• Mounting Method

  clamp ring

• Maximum Starting Torque

  0.60 inch-ounces (ounce-inches)

• Actuator Type

  single shaft

• Overall Diameter

  2.000 inches nominal

• Shaft Length

  0.250 inches nominal

• Shaft Diameter

  0.250 inches nominal

• Undercut Width

  0.0310 inches nominal

• Undercut Diameter

  1.9375 inches nominal

• Overall Length

  1.000 inches nominal

• Pilot Diameter

  1.9350 inches minimum and 1.9370 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  25.0 single section

• Function Characteristic Per Section

  single section linear

• Actuator Travel Control Feature

  continuous motion

• Resistance Tolerance Per Section In Percent

  m5.0/p5.0 single section

• Tap Location Tolerance Per Section

  m2.0/p2.0 ohms single section

• Power Dissipation Rating Per Section In Watts

  4.0 free air single section

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  m150.0/p150.0 single section

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Electrical Resistance Per Section

  100.000 kilohms single section

• Features Provided

  nonmetallic shaft

• Terminal Location

  radially positioned over less than half the circumference

• Shaft End Play

  0.00050 inches

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Mounting Lip Depth

  0.0310 inches nominal

• Mounting Lip Diameter

  1.9950 inches minimum and 2.0050 inches maximum

• Body Length

  0.963 inches minimum and 0.973 inches maximum

• Body Diameter

  1.995 inches minimum and 2.005 inches maximum

• Pilot Length

  0.0270 inches minimum and 0.0320 inches maximum

• Reliability Indicator

  not established

• Section Quantity

  1