2603956

Technical Characteristics

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Function Conformity Per Section

  all sections independent linearity

• Actuator Type

  single shaft

• Function Conformity Tolerance Per Section

  -0.50/+0.50 all sections

• Reliability Indicator

  not established

• Effective Electrical Rotation In Deg Angular Rotation

  354.0 nominal

• Pilot Length

  0.06200 inches nominal

• Overall Diameter

  2.500 inches maximum

• Actuator Travel Control Feature

  continuous motion

• Undercut Diameter

  1.875 inches maximum

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Lateral Runout

  0.006 inches

• Terminal Type And Quantity

  6 solder stud

• Shaft Runout

  0.001 inches

• Pilot Diameter

  1.87400 inches minimum and 1.87500 inches maximum

• Maximum Starting Torque

  1.40 inch-ounces

• Overall Length

  2.207 inches nominal

• Test Data Document

  06424-2603956 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Section Quantity

  2

• Power Dissipation Rating Per Section In Watts

  3.5 free air all sections

• Shaft End Play

  0.005 inches

• Shaft Radial Play

  0.002 inches

• Electrical Resistance Per Section

  5.0 percent, rated amperes c and better finish

• Body Diameter

  2.000 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 1st section

• Shaft Length

  0.625 inches nominal

• Mounting Lip Depth

  0.09300 inches nominal

• Pilot Diameter Runout

  0.0015 inches

• Maximum Running Torque

  1.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 all sections

• Body Style

  cylindrical servo mounted

• Body Length

  1.582 inches nominal

• Shaft Style

  round

• Mounting Lip Diameter

  2.00000 inches nominal

• Shaft Diameter

  0.249 inches minimum and 0.250 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 all sections

• Undercut Width

  any acceptable

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 2nd section

• Features Provided

  nonmetallic shaft

• Shaft Bearing Type

  bearing

• Electrical Resistance Per Section

  25.0 percent, rated amperes c and better industrial clears

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Function Characteristic Per Section

  all sections linear