MIL-R-94/2

Technical Characteristics

• Shaft Length

  0.344 inches minimum and 0.406 inches maximum

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• ~1

  data on certain environmental and performance r

• Test Data Document

  81349-mil-r-94 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Cubic Measure

  0.236 cubic inches

• Nonturn Device Radius

  0.359 inches minimum and 0.391 inches maximum

• Maximum Stop Torque

  80.00 inch-ounces

• Screw Thread Diameter

  0.250 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Screw Thread Quantity Per Inch

  32.0

• Actuator Travel Control Feature

  stops

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Body Style

  cylindrical bushing mounted

• Shaft Style

  round, slotted

• Specification/Standard Data

  81349-mil-r-94/2 government specification

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Body Length

  0.359 inches minimum and 0.391 inches maximum

• Electrical Resistance Per Section

  500.0 ohms single section

• Terminal Type And Quantity

  3 tab, solder lug

• Mounting Bushing Length

  0.234 inches minimum and 0.266 inches maximum

• Maximum Starting Torque

  6.00 inch-ounces

• Body Diameter

  0.719 inches minimum and 0.781 inches maximum

• Overall Length

  0.703 inches minimum and 0.797 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Overall Diameter

  0.953 inches maximum

• Screw Thread Series Designator

  unef

• Rotary Actuator Travel In Angular Deg

  295.0 minimum and 305.0 maximum

• Nonturn Device Location

  at 9 oclock

• Mounting Method

  standard bushing

• Standard Taper Curve Per Section

  a single section

• Terminal Location

  radially positioned over less than half the circumference