501A080-801-107

Technical Characteristics

• Lateral Runout

  0.001 inches

• Body Style

  cylindrical servo mounted

• Shaft Radial Play

  0.001 inches

• Maximum Running Torque

  0.90 inch-ounces

• Shaft Diameter

  0.250 inches nominal

• Undercut Diameter

  1.812 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  3780.0 nominal

• Shaft Style

  round

• Pilot Diameter Runout

  0.001 inches

• Pilot Length

  0.0930 inches nominal

• Tap Location From Ccw Terminal Per Section In Ohms

  25000.0 single section

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  85.0 single section

• Mounting Lip Depth

  0.0620 inches nominal

• Maximum Stop Torque

  600.00 inch-ounces

• Shaft Bearing Type

  bearing

• Function Conformity Per Section

  single section independent linearity

• Power Dissipation Rating Per Section In Watts

  5.0 free air single section

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Terminal Location

  longitudinally positioned on the circumference

• Shaft Length

  0.938 inches nominal

• Shaft End Play

  0.005 inches

• Pilot Diameter

  1.8750 inches nominal

• Test Data Document

  25500-501a080-801-107 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Lip Diameter

  1.8750 inches nominal

• Body Length

  2.125 inches nominal

• Section Quantity

  1

• Angle Between Centerlines Of Mounting Holes In Deg

  120.0

• Function Characteristic Per Section

  single section linear

• Function Conformity Tolerance Per Section

  -0.15/+0.15 single section

• Shaft Runout

  0.001 inches

• Electrical Resistance Per Section

  50.0 kilohms single section

• Mounting Method

  clamp ring

• Terminal Type And Quantity

  4 tab, solder lug

• Maximum Starting Torque

  1.30 inch-ounces

• Angle Of Mounting Hole In Deg

  90.0

• Actuator Travel Control Feature

  continuous motion

• Reliability Indicator

  not established

• Actuator Type

  single shaft

• Undercut Width

  0.0620 inches nominal

• Mounting Hole/Stud Circle Diameter

  1.000 inches nominal

• Body Diameter

  2.000 inches nominal

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  40.0 single section

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Fixed Tap Quantity Per Section

  1 single section