SP5256-12

Technical Characteristics

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Rotary Actuator Travel In Angular Deg

  3600.0 minimum and 3610.0 maximum

• Features Provided

  shaft seal

• Screw Thread Series Designator

  unef

• Mechanical Backlash In Deg Angular Rotation

  1.0

• Lateral Runout

  0.005 inches

• Shaft Runout

  0.002 inches

• Maximum Stop Torque

  48.00 inch-ounces (ounce-inches)

• Body Length

  0.980 inches minimum and 1.020 inches maximum

• Mounting Bushing Length

  0.296 inches minimum and 0.328 inches maximum

• Body Diameter

  0.859 inches minimum and 0.891 inches maximum

• Reliability Indicator

  not established

• Body Style

  caaql 1b

• Section Quantity

  1

• Terminal Type And Quantity

  3 tab, solder lug

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 single section

• Function Characteristic Per Section

  single section linear

• Actuator Travel Control Feature

  clutch

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 single section

• Function Conformity Per Section

  single section independent linearity

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Function Conformity Tolerance Per Section

  -0.20/+0.20 single section

• Electrical Resistance Per Section

  2.0 kilohms single section

• Mounting Method

  standard bushing

• Terminal Location

  radially positioned over less than half the circumference

• Screw Thread Quantity Per Inch

  32.0

• Screw Thread Diameter

  0.375 inches nominal

• Shaft Radial Play

  0.003 inches

• Pilot Diameter Runout

  0.002 inches

• Shaft End Play

  0.005 inches

• Maximum Starting Torque

  0.60 inch-ounces (ounce-inches)

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 minimum and 3610.0 maximum

• Actuator Type

  single shaft

• Shaft Style

  caedx 3c

• Shaft Length

  0.796 inches minimum and 0.828 inches maximum

• Shaft Diameter

  0.2494 inches minimum and 0.2497 inches maximum