RR1000C2A8K103

Technical Characteristics

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Shaft Runout

  0.002 inches

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Resistance Tolerance Per Section In Percent

  -3.000/+3.000 single section

• Shaft End Play

  0.005 inches

• Maximum Running Torque

  0.60 inch-ounces

• Body Diameter

  0.906 inches maximum

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Electrical Resistance Per Section

  10.0 kilohms single section

• Body Length

  1.625 inches maximum

• Mounting Lip Diameter

  0.8750 inches maximum

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -30.0/+30.0 single section

• Function Conformity Per Section

  single section independent linearity

• Mounting Lip Depth

  0.0620 inches nominal

• Undercut Width

  0.0570 inches nominal

• Maximum Starting Torque

  0.70 inch-ounces

• Mechanical Backlash In Deg Angular Rotation

  0.25

• Shaft Style

  round

• Terminal Type And Quantity

  3 tab, solder lug

• Pilot Diameter

  0.7500 inches nominal

• Body Style

  cylindrical servo mounted

• Maximum Stop Torque

  48.00 inch-ounces

• Undercut Diameter

  0.781 inches nominal

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Test Data Document

  09344-ps70060 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Shaft Length

  0.625 inches nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Shaft Radial Play

  0.002 inches

• Shaft Diameter

  0.125 inches nominal

• Pilot Length

  0.0620 inches minimum

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Function Characteristic Per Section

  single section linear

• Special Features

  the clamp-ring ear (s) shall be 180 deg porm 10 deg from the center line of the terminal locations