3179574-18

Technical Characteristics

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.200 minimum at 200 pct all locations and 6.000 maximum at 200 pct all locations

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac all locations

• Case Material

  plastic

• Maximum Continuous Load Current Rating Per Pole

  1.0 amperes ac all locations

• Fragility Factor

  moderately rugged

• Special Handling Feature

  magnetic

• Center To Center Distance Between Terminals Parallel To Width

  0.687 inches nominal

• Auxiliary Switch Function And Quantity

  1 alarm

• Switch Voltage Rating And Type In Volts

  120.0 ac and 50.0 dc

• Thread Series Designator

  unef

• Nonturn Device Diameter

  0.180 inches minimum and 0.300 inches maximum

• Switch Terminal Type

  pin

• Frequency In Hertz

  400.0 all locations

• Center To Center Distance Between Terminals Parallel To Length

  0.906 inches maximum

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  138.0 all locations

• Body Length

  1.562 inches maximum

• Switch Current Rating And Type In Amps

  0.5 ac and 0.5 dc

• Arc Quenching Method

  magnetic blowout

• Main Contact Tripping Mechanism Type

  trip free

• Actuator Position Designation

  between pole one and two

• Body Width

  1.937 inches maximum

• Manual Actuator Type And Quantity

  1 toggle

• Nonturn Device Radius

  0.625 inches nominal

• Body Style

  multipole-single actuator type

• Switch Contact Arrangement

  single pole, double throw

• Terminal Type And Quantity

  4 wire hook

• Trip Release Method

  magnetic all locations

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations

• Thread Quantity Per Inch

  32

• Nominal Thread Size

  0.375 inches

• Nonturn Device Location

  at 12 oclock

• Internal Trip Release Configuration

  series trip all locations

• Mounting Surface To Terminal End Distance

  1.828 inches maximum

• Actuator Function

  trip-reset

• Trip Release Characteristic

  time delay all locations

• Switch Location And Position Designation

  internal at pole two

• Storage Type

  general purpose warehouse

• Mounting Facility Type And Quantity

  1 threaded bushing w/panel seal

• Reset Method

  manual

• Pole Quantity

  2

• Test Data Document

  10001-3179574 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Bushing Length

  0.280 inches minimum and 0.380 inches maximum

• Circuit Protection Type

  overcurrent all locations

• Inclosure Protection Type For Which Designed

  shock resistant and fungus resistant and vibration resistant and moisture resistant and salt spray proof