2H50815-2X18P

Technical Characteristics

• Overall Length

  2.950 inches nominal

• Flat Height

  0.218 inches nominal single actuator

• Shaft Diameter

  0.249 inches minimum single actuator and 0.251 inches maximum

• Individual Section Quantity

  2

• Switch Contact Basic Design

  pile-up

• Mounting Method

  threaded hole single mounting facility

• Contact Voltage Rating In Volts

  300.0 ac at sea level

• Switch Actuator Indexing Position Quantity

  15 single actuator

• Contact Switching Action

  breaks before makes each section front

• Switch Actuator Positioning Increment

  22.5 degrees single actuator

• Switch Actuator Stop Device Type

  adjustable stop single actuator

• Contact Load Current Rating

  50.0 milliamperes resistive load ac at sea level

• Shaft Length

  0.969 inches minimum single actuator and 1.031 inches maximum

• Pole Quantity

  2 each section front

• Contact Voltage Rating In Volts

  30.0 dc at sea level

• Shaft Type

  round, flatted single actuator

• Terminal Type

  solder stud

• Detent Rotational Torque Range

  2.0 to 9.0 inch-pounds (pound-inches) single actuator

• Contact Load Current Rating

  500.0 milliamperes resistive load dc at sea level

• Style Designator

  21 square wafer, panel mount

• ~1

  at no load or low level;contact resistance-2 contacts per quadrant on each pole;sides of front panel chamfered 1.220 plus or minus 0.015 in.r;width &length of front panel minus contacts 1.069 to 2.031 in.

• Supplementary Features

  1000 mego min insulation resistance;switch plate insulation epoxy glass laminate type geb;contacts & rings-silver alloy;mounting hardware-3/8-32nef-2b hex nut & internal tooth lock washer;stops adjustable from both ens of throw;life-50000 rotations min