01325-1

Technical Characteristics

• Shaft Flat/Slot Angular Location

  0.0 degrees from nonturn device all actuators

• Flat Height

  0.219 inches minimum 1st actuator and 0.221 inches maximum 1st actuator

• Individual Section Quantity

  6

• First Flat Length

  0.355 inches minimum 1st actuator and 0.395 inches maximum 1st actuator

• Nominal Thread Size

  0.375 inches single mounting facility

• Shaft Type

  round, hollowed, flatted 1st actuator

• Style Designator

  tap, circular, bushing mount

• Shaft Type

  round, flatted 2nd actuator

• Overall Length

  4.213 inches minimum and 4.425 inches maximum

• Err Default

  err default and err default

• Contact Load Current Rating

  250.0 milliamperes resistive load dc at sea level and 20.0 milliamperes inductive load dc at sea level

• Contact Switching Action

  breaks before makes each section rear

• Contact Voltage Rating In Volts

  115.0 ac at sea level

• Shaft Length

  0.980 inches minimum 1st actuator and 1.020 inches maximum 1st actuator

• Contact Load Current Rating

  250.0 milliamperes resistive load ac at sea level

• Nonturn Device Type

  slotted bushing at 3:00 o'clock

• Pole Quantity

  1 each section front

• Switch Actuator Stop Device Type

  fixed stop all actuators

• Switch Actuator Indexing Position Quantity

  10 all actuators

• Shaft Diameter

  0.248 inches minimum 1st actuator and 0.251 inches maximum 1st actuator

• Shaft Length

  1.400 inches minimum 2nd actuator and 1.480 inches maximum 2nd actuator

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Rotor Through Connection Quantity

  1 each section

• Overall Diameter

  0.750 inches nominal

• First Flat Length

  0.375 inches nominal 2nd actuator

• Thread Series Designator

  unef single mounting facility

• Switch Contact Basic Design

  nonpile-up symmetrical

• Shaft Diameter

  0.123 inches minimum 2nd actuator and 0.126 inches maximum 2nd actuator

• Switch Actuator Positioning Increment

  36.0 degrees all actuators

• Terminal Type

  tab, solder lug

• Operating Temp Range

  -65.0/+85.0 deg celsius

• Thread Class

  2a single mounting facility

• Throw Quantity

  10 each section rear

• Flat Height

  0.088 inches minimum 2nd actuator and 0.098 inches maximum 2nd actuator

• Mounting Method

  threaded bushing w/panel seal single mounting facility

• Hazardous Locations/Environmental Protection

  explosion proof