960042-3

Technical Characteristics

• Pilot Diameter

  0.7495 inches minimum and 0.7500 inches maximum

• Maximum Running Torque

  0.30 inch-ounces

• Mounting Method

  clamp ring

• Maximum Starting Torque

  0.40 inch-ounces

• Terminal Location

  radially positioned over less than half the circumference

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Special Features

  one 2000 ohm fixed resistor externally attached between terminals 3 and 4

• Function Characteristic Per Section

  7 oclock 12th primary

• Test Data Document

  82577-960042 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Undercut Diameter

  0.750 inches maximum

• Terminal Type And Quantity

  4 turret

• Overall Diameter

  1.068 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Electrical Resistance Per Section

  12.0 percent, rated amperes c and better flooring

• Overall Length

  2.036 inches minimum and 2.116 inches maximum

• Shaft Length

  0.510 inches minimum and 0.570 inches maximum

• Undercut Width

  0.0570 inches minimum

• Section Quantity

  1

• Power Dissipation Rating Per Section In Watts

  2.0 7th secondary quality

• Body Diameter

  0.875 nominal inches

• Function Conformity Per Section

  single section absolute conformity

• Actuator Travel Control Feature

  stops

• Fragility Factor

  rugged

• Effective Electrical Rotation In Deg Angular Rotation

  3344.4 nominal

• Shaft Style

  round, slotted

• Shaft Bearing Type

  ball

• Mounting Lip Diameter

  0.8750 inches nominal

• Mounting Lip Depth

  0.0620 nominal inches

• Shaft Diameter

  0.1245 inches minimum and 0.1248 inches maximum

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Body Style

  cylindrical servo mounted

• Function Conformity Tolerance Per Section

  -0.20/+0.20 single section

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Maximum Stop Torque

  100.00 inch-ounces

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Body Length

  1.526 inches minimum and 1.546 inches maximum