135-13102-030

Technical Characteristics

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -50.0/+50.0 single section

• Features Provided

  humidity proof

• Terminal Type And Quantity

  3 pin

• Shaft Length

  0.075 inches minimum and 0.085 inches maximum

• Center To Center Distance Between Terminals

  0.195 inches minimum and 0.205 inches maximum

• Body Style

  rectangular

• Section Quantity

  1

• Body Width

  0.180 inches minimum and 0.200 inches maximum

• Maximum Running Torque

  5.00 inch-ounces

• Electrical Resistance Per Section

  1.0 percent, rated amperes c and better flooring

• Body Height

  0.397 inches minimum and 0.413 inches maximum

• Rotary Actuator Travel In Angular Deg

  6480.0 minimum and 10080.0 maximum

• Shaft Bearing Type

  sleeve

• Cubic Measure

  0.031 cubic inches

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary quality

• Terminal Location

  lower adjacent side two rows

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  150.0 single section

• Shaft Style

  round

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 single section

• Special Features

  sealed to permit cleaning in common solvents

• Effective Electrical Rotation In Deg Angular Rotation

  6480.0 minimum and 10080.0 maximum

• Actuator Travel Control Feature

  clutch

• Center To Center Distance Between Terminal Rows

  0.095 inches minimum and 0.105 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.095 nominal mils and 0.105 nominal centimeters

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Terminal Length

  0.172 inches minimum and 0.202 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Fragility Factor

  moderately rugged

• Body Length

  0.370 inches minimum and 0.380 inches maximum

• Mounting Method

  terminal

• Shaft Diameter

  0.088 inches minimum and 0.098 inches maximum

• Maximum Starting Torque

  5.00 inch-ounces

• Standard Taper Curve Per Section

  a single section