X24-311-165

Technical Characteristics

• Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

  300.0 ac all locations and 500.0 dc all locations

• Inclosure Protection Type For Which Designed

  fungus resistant and hermetically sealed

• Operating Voltage Type And Rating Per Pole In Volts

  240.0 ac all locations and 50.0 dc all locations

• Mounting Facility Type And Quantity

  thd bushing w/panel seal

• Nominal Thread Size

  0.375 inches

• Thread Quantity Per Inch

  32

• Trip Release Method

  magnetic all locations

• Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

  125.0 all locations

• Terminal Type And Quantity

  4 wire hook

• Switch Contact Arrangement

  single pole, double throw

• Body Style

  multipole-single actuator type

• Case Material

  metal

• Manual Actuator Type And Quantity

  1 toggle

• Actuator Position Designation

  between pole one and two

• Main Contact Tripping Mechanism Type

  trip free

• Switch Current Rating And Type In Amps

  0.5 ac and 0.5 dc

• Body Length

  1.562 inches maximum

• Center To Center Distance Between Terminals Parallel To Length

  0.906 inches maximum

• Frequency In Hertz

  400.0 all locations

• Thread Series Designator

  unef

• Switch Voltage Rating And Type In Volts

  120.0 ac and 50.0 dc

• Auxiliary Switch Function And Quantity

  1 alarm

• Specification/standard Data

  81349-mil-c-39019/4 government specification

• Body Width

  1.281 inches maximum

• Maximum Continuous Load Current Rating Per Pole

  250.0 milliamperes ac all locations and 250.0 milliamperes dc all locations

• Bushing Length

  0.380 inches maximum

• ~1

  data on certain environmental and performanc

• Test Data Document

  81349-mil-c-39019 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type

• Switch Terminal Type

  tab, solder lug

• Circuit Protection Type

  overcurrent all locations

• Pole Quantity

  2

• Reset Method

  manual

• Trip Delay Time In Seconds Per Rated Continuous Current

  0.055 minimum at 200 pct all locations and 0.950 maximum at 200 pct all locations

• Switch Location And Position Designation

  internal at pole two

• Trip Release Characteristic

  time delay all locations

• Center To Center Distance Between Terminals Parallel To Width

  0.625 inches nominal

• Actuator Function

  trip-reset

• Mounting Surface To Terminal End Distance

  1.828 inches maximum

• Internal Trip Release Configuration

  series trip all locations