1003AM1-5

Technical Characteristics

• Mounting Facility Quantity

  4 single group

• Mounting Hole Diameter

  0.137 inches minimum single group and 0.157 inches maximum single group

• Body Height

  1.780 inches minimum and 1.840 inches maximum

• Special Features

  primary rated but not included

• Winding Operating Voltage

  0.90 dc pounds per hour dry single component single secondary and 5.10 dc pounds per hour with retaining chain single component single secondary

• Body Length

  2.030 inches minimum and 2.090 inches maximum

• Test Data Document

  10001-3021909 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Center To Center Distance Between Mounting Facilities Parallel To Length

  1.490 inches minimum single mounting facility single center group and 1.510 inches maximum single mounting facility single center group

• Mounting Method

  unthreaded hole single group

• Terminal Type And Quantity

  2 wire lead

• Features Provided

  color coded lead

• Reliability Indicator

  not established

• Input-Output Phase Relationship

  single phase to single phase single component

• Frequency Rating

  60.0 hertz nominal single component

• Cubic Measure (Non-Core)

  6.5 cubic inches

• Center To Center Distance Between Mounting Facilities Parallel To Width

  1.365 inches minimum single mounting facility single center group and 1.385 inches maximum single mounting facility single center group

• Body Width

  1.720 inches minimum and 1.780 inches maximum

• Inclosure Type

  hermetically sealed with oil

• Winding Operating Current

  5.0 amperes maximum of standard range b and better drop siding single component single primary