152-4

Technical Characteristics

• Maximum Stop Torque

  48.00 inch-ounces

• First Flat Length

  0.120 inches minimum and 0.130 inches maximum

• Center To Center Distance Between Center Terminal And Outside Terminal

  0.095 inches minimum and 0.105 inches maximum

• Body Height

  0.485 inches minimum and 0.515 inches maximum

• Body Width

  0.485 inches minimum and 0.515 inches maximum

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 single section

• Switch Voltage Rating In Volts

  30.0

• Screw Thread Diameter

  0.235 inches minimum and 0.265 inches maximum

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Switch Current Type And Rating In Amps

  0.250 dc

• Shaft Style

  round, flatted

• Maximum Running Torque

  4.50 inch-ounces

• Mounting Method

  standard bushing

• Mounting Bushing Length

  0.235 inches minimum and 0.265 inches maximum

• Standard Taper Curve Per Section

  a single section

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Flat Height

  0.092 inches minimum and 0.096 inches maximum

• Body Length

  0.969 inches minimum and 0.999 inches maximum

• Maximum Starting Torque

  4.50 inch-ounces

• Terminal Type And Quantity

  7 pin

• Rotary Actuator Travel In Angular Deg

  295.0 nominal

• Center To Center Distance Between Terminals

  0.195 inches minimum and 0.205 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Section Quantity

  1

• Body Style

  rectangular bushing mounted

• Switch Contact Arrangement

  double pole, single throw, normally open

• Screw Thread Quantity Per Inch

  32.0

• Actuator Travel Control Feature

  stops

• Shaft Diameter

  0.124 inches minimum and 0.126 inches maximum

• Features Provided

  switch

• Effective Electrical Rotation In Deg Angular Rotation

  265.0 nominal

• Electrical Resistance Per Section

  10.0 kilohms single section

• Power Dissipation Rating Per Section In Watts

  0.5 free air single section

• Terminal Length

  0.115 inches minimum and 0.125 inches maximum

• Shaft Bearing Type

  sleeve

• Cubic Measure

  0.265 cubic inches

• Switch Operating Position

  any position of rotation travel

• Terminal Location

  lower adjacent side single row

• Switch Type

  push

• Shaft Length

  0.703 inches minimum and 0.735 inches maximum