NSN: 5905-00-194-5251

Technical Characteristics

• Maximum Running Torque

  0.55 inch-ounces

• Terminal Type And Quantity

  6 turret

• Body Length

  1.437 inches maximum

• Shaft End Play

  0.005 inches

• Undercut Diameter

  0.975 inches maximum

• Section Quantity

  2

• Function Characteristic Per Section

  all sections linear

• Mounting Lip Depth

  0.0620 inches nominal

• Mounting Lip Diameter

  1.0620 inches nominal

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Pilot Diameter

  0.9688 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Maximum Starting Torque

  0.85 inch-ounces

• Body Style

  cylindrical servo mounted

• Lateral Runout

  0.001 inches

• Resistance Tolerance Per Section In Percent

  -3.0/+3.0 all sections

• Body Diameter

  1.125 inches maximum

• Function Conformity Per Section

  all sections absolute linearity

• Shaft Radial Play

  0.002 inches

• Shaft Diameter

  0.125 inches nominal

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Power Dissipation Rating Per Section In Watts

  1.0 7th secondary pattern

• Pilot Length

  0.0620 inches nominal

• Actuator Type

  single shaft

• Reliability Indicator

  not established

• Actuator Travel Control Feature

  continuous motion

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Function Conformity Tolerance Per Section

  -0.25/+0.25 all sections

• Power Dissipation Rating Per Section In Watts

  1.5 7th secondary finish

• Electrical Resistance Per Section

  2.0 percent, rated amperes c and better finish

• Electrical Resistance Per Section

  5.0 percent, rated amperes c and better industrial clears

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Test Data Document

  82340-60917 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Undercut Width

  0.0570 inches minimum

• Shaft Runout

  0.002 inches

• Shaft Length

  0.750 inches nominal