NSN: 5905-00-577-7752
Resistors
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
RESISTOR,VARIABLE,WIRE WOUND,NONPRECISION
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Actuator Travel Control Feature
stops
-
Pilot Diameter
1.8750 inches nominal
-
Section Quantity
2
-
Power Dissipation Rating Per Section In Watts
3.0 free air all sections
-
Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 all sections
-
Undercut Width
0.0930 inches nominal
-
Standard Taper Curve Per Section
a 1st section
-
Shaft Style
round
-
Mounting Facility Quantity
3
-
Tap Location Tolerance Per Section
-1.0/+1.0 deg angular rotation 1st section
-
Shaft Diameter
0.250 inches nominal
-
Body Style
cylindrical servo mounted
-
Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 all sections
-
Rotary Actuator Travel In Angular Deg
3600.0 nominal
-
Body Diameter
2.000 inches nominal
-
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
1800.0 1st section
-
Body Length
4.156 inches nominal
-
Angle Of Mounting Hole In Deg
45.0
-
Pilot Length
0.0620 inches nominal
-
Actuator Type
single shaft
-
Effective Electrical Rotation In Deg Angular Rotation
3600.0 nominal
-
Reliability Indicator
not established
-
Screw Thread Series Designator
unc
-
Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
105.0 all sections
-
Terminal Location
radially positioned over less than half the circumference
-
Mounting Method
threaded hole
-
Undercut Diameter
1.875 inches nominal
-
Electrical Resistance Per Section
5.0 percent, rated amperes c and better industrial clears
-
Screw Thread Diameter
0.164 inches nominal
-
Standard Taper Curve Per Section
c 2nd section
-
Angle Between Centerlines Of Mounting Holes In Deg
120.0
-
Screw Thread Quantity Per Inch
32.0
-
Fixed Tap Quantity Per Section
1 1st section
-
Terminal Type And Quantity
7 solder stud
-
Mounting Lip Depth
0.0620 inches nominal
-
Mounting Lip Diameter
2.0000 inches nominal
-
Mounting Hole/Stud Circle Diameter
1.250 inches nominal
-
Shaft Length
0.626 inches nominal
-
Resistance Tolerance Per Section In Percent
-5.0/+5.0 all sections
-
Electrical Resistance Per Section
20.0 percent, rated amperes c and better finish