NSN: 5905-01-038-4290

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Power Dissipation Rating Per Section In Watts

  2.0 free air all sections

• Shaft End Play

  0.005 inches

• Section Quantity

  2

• Shaft Diameter

  0.1247 inches minimum and 0.1248 inches maximum

• Shaft Bearing Type

  ball

• Actuator Type

  double ended shaft

• Function Characteristic Per Section

  all sections linear

• Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius

  -20.0/+20.0 all sections

• Test Data Document

  26055-855-029-001 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Terminal Type And Quantity

  6 tab, solder lug

• Mounting Lip Diameter

  0.8750 inches nominal

• Maximum Running Torque

  0.70 inch-ounces

• Mounting Lip Depth

  0.0620 inches nominal

• Body Length

  1.545 inches nominal

• Resistance Tolerance Per Section In Percent

  -5.0/+5.0 all sections

• Shaft Style

  round

• Pilot Diameter

  0.7500 inches nominal

• Function Conformity Tolerance Per Section

  -0.10/+0.10 1st section

• Maximum Starting Torque

  0.90 inch-ounces

• Body Style

  cylindrical servo mounted

• Rotary Actuator Travel In Angular Deg

  3600.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  125.0 all sections

• Shaft Radial Play

  0.002 inches

• Function Conformity Per Section

  all sections independent linearity

• Pilot Diameter Runout

  0.002 inches

• Pilot Length

  0.0620 inches nominal

• Effective Electrical Rotation In Deg Angular Rotation

  3600.0 nominal

• Reliability Indicator

  not established

• Function Conformity Tolerance Per Section

  -0.25/+0.25 2nd section

• Lateral Runout

  0.003 inches

• Maximum Stop Torque

  75.00 inch-ounces

• Mounting Method

  clamp ring

• Terminal Location

  radially positioned over less than half the circumference

• Body Diameter

  0.875 inches nominal

• Undercut Diameter

  0.750 inches maximum

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Shaft Length

  0.343 inches nominal

• Undercut Width

  0.0570 inches minimum

• Electrical Resistance Per Section

  5.0 kilohms all sections

• Shaft Runout

  0.002 inches