NSN: 5905-01-163-3933

Technical Characteristics

• Function Conformity Per Section

  all sections absolute conformity

• Shaft Diameter

  0.250 inches nominal

• Electrical Resistance Per Section

  30.000 percent, rated amperes c and better finish

• Shaft Radial Play

  0.001 inches

• Electrical Resistance Per Section

  9.700 percent, rated amperes c and better industrial clears

• Section Quantity

  2

• Rotary Actuator Travel In Angular Deg

  1080.0 nominal

• Shaft End Play

  0.00500 inches

• Function Characteristic Per Section

  8 oclock 12th primary

• Terminal Type And Quantity

  10 turret

• Body Diameter

  3.302 inches nominal

• Shaft Bearing Type

  bearing

• Special Features

  built-in 3.846kohm trim resistor between terminals eight and ten

• Effective Electrical Rotation In Deg Angular Rotation

  868.604 nominal

• Power Dissipation Rating Per Section In Watts

  0.25 7th secondary pattern

• Power Dissipation Rating Per Section In Watts

  0.75 7th secondary finish

• Body Length

  1.857 inches maximum

• Fixed Tap Quantity Per Section

  1 2nd section

• Mechanical Backlash In Deg Angular Rotation

  0.1

• Body Style

  cylindrical hole/slot mounted

• Shaft Style

  round

• Resistance Temp Characteristic Range Per Section In Percent

  -5.0/+5.0 -65 deg celsius all sections and -5.0/+5.0 105 deg celsius all sections and -5.0/+5.0 75 deg celsius all sections and -4.0/+4.0 -15 deg celsius all sections and -2.5/+2.5 50 deg celsius all sections and -5.0/+5.0 125 deg celsius all sections

• Maximum Running Torque

  0.80 inch-ounces

• Pilot Diameter Runout

  0.00100 inches

• Maximum Starting Torque

  1.00 inch-ounces

• Actuator Travel Control Feature

  clutch

• Shaft Length

  0.592 inches nominal

• Lateral Runout

  0.002 inches

• Actuator Type

  single shaft

• Function Characteristic Per Section

  9 oclock all primaries

• Reliability Indicator

  not established

• Test Data Document

  19207-12292881 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Mounting Facility Quantity

  2

• Mounting Slot Width

  0.204 inches nominal

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  102.681 1st section and 205.722 1st section

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  720.027 2nd section

• Mounting Hole/stud Circle Diameter

  2.500 inches nominal

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 all sections

• Fixed Tap Quantity Per Section

  2 1st section

• Function Conformity Tolerance Per Section

  -0.25/+0.25 all sections

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  135.0 all sections

• Mounting Method

  slot

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 all sections

• Tap Location Tolerance Per Section

  -0.5/+0.5 ohms all sections

• Unpackaged Unit Weight

  10.00 ounces

• Terminal Location

  radially positioned over more than half the circumference

• Shaft Runout

  0.002 inches