NSN: 5930-01-088-4805

Technical Characteristics

• Contact Load Current Rating

  5.0 amperes resistive load ac at sea level and 2.0 amperes inductive load ac at sea level

• Overall Length

  5.895 inches minimum and 6.041 inches maximum

• Terminal Type

  tab, solder lug

• Switch Contact Basic Design

  nonpile-up symmetrical

• Nominal Thread Size

  0.375 inches 1st mounting facility

• Shaft Diameter

  0.248 inches minimum single actuator and 0.251 inches maximum single actuator

• Rotor Through Connection Quantity

  1 each section

• Contact Voltage Rating In Volts

  28.0 dc at sea level

• Nonturn Device Radius

  0.360 inches minimum at 3:00 o'clock and 0.390 inches maximum at 3:00 o'clock

• Longest Horizontal Distance Between Mounting Centers

  0.990 inches minimum 2nd mounting facility and 1.010 inches maximum 2nd mounting facility

• Individual Section Quantity

  12

• Nominal Thread Size

  0.073 inches 2nd mounting facility

• Shaft Flat/Slot Angular Location

  195.0 degrees from nonturn device single actuator

• Contact Load Current Rating

  1.0 amperes resistive load dc at sea level

• Flat Height

  0.215 inches minimum single actuator and 0.223 inches maximum single actuator

• Pole Quantity

  1 each section front

• Switch Actuator Stop Device Type

  fixed stop single actuator

• Throw Quantity

  6 each section rear

• Overall Diameter

  1.254 inches minimum and 1.314 inches maximum

• Thread Series Designator

  unef 1st mounting facility

• Switch Actuator Indexing Position Quantity

  6 single actuator

• Thread Class

  2a 1st mounting facility

• Switch Actuator Positioning Increment

  45.0 degrees single actuator

• Contact Voltage Rating In Volts

  115.0 ac at sea level

• Thread Series Designator

  unf 2nd mounting facility

• Contact Switching Action

  breaks before makes each section rear

• Precious Material And Location

  contacts silver

• Mounting Method

  threaded bushing 1st mounting facility

• Err Default

  err default

• Err Default

  err default and err default

• Mounting Facility Pattern

  two position in-line 2nd mounting facility

• Operating Temp Range

  -55.0/+125.0 deg celsius

• Precious Material

  silver

• Style Designator

  tap, circular, bushing mount

• Thread Class

  2a 2nd mounting facility

• Mounting Method

  threaded stud 2nd mounting facility

• Shaft Type

  round, flatted single actuator

• First Flat Length

  0.230 inches minimum single actuator and 0.270 inches maximum single actuator

• Shaft Length

  0.417 inches minimum single actuator and 0.457 inches maximum single actuator

• Nonturn Device Type

  tab at 3:00 o'clock

• Hazardous Locations/Environmental Protection

  moisture resistant