NSN: 5990-00-006-5759

Technical Characteristics

• Terminal Type And Quantity

  5 screw

• Shaft Slot Width

  0.0200 inches minimum single shaft and 0.0300 inches maximum

• Shaft Slot Depth

  0.0250 inches minimum single shaft and 0.0350 inches maximum

• Actuator Friction Torque At Minus 55 Deg Celsius

  16.0 centimeter-grams (gram-centimeters) maximum

• Electrical Error Angular Range In Minutes

  -7.0 to 7.0

• Phase Shift Angle In Deg

  5.500 input to output nominal

• Zss Impedance Angle In Deg

  81.50 nominal

• Rotor Input Electrical Power Rating

  600.0 milliwatts nominal

• Rotor Input Current Rating

  140.0 milliamperes nominal

• Body Size

  11

• Fragility Factor

  moderately rugged

• Shaft Length

  0.2950 inches minimum single shaft and 0.3150 inches maximum

• Overall Length

  2.0700 inches minimum and 2.0900 inches maximum

• Shoulder Diameter

  0.9995 inches minimum and 1.0000 inches maximum

• Body Material

  steel, stainless

• Transformation Ratio

  0.454 rotor to stator nominal

• Shaft Type

  round, slotted single shaft

• Terminal Location

  rear

• Mounting Surface To Terminal End Distance

  1.7720 inches minimum and 1.7780 inches maximum

• Shoulder Length

  0.0590 inches minimum and 0.0650 inches maximum

• Pilot Length

  0.0590 inches minimum and 0.0650 inches maximum

• Actuator Friction Torque At Plus 25 Deg Celsius

  4.0 centimeter-grams (gram-centimeters) maximum

• Maximum Total Null Voltage Output In Millivolts Per Volt

  30.00

• Maximum Fundamental Null Voltage In Millivolts Per Volt

  20.00 output

• Stator Dc Resistance In Ohms

  5.30 nominal

• Rotor Dc Resistance In Ohms

  18.90 nominal

• Zss Impedance Magnitude In Ohms

  38.00 nominal

• Zso Impedance Angle In Deg

  81.50 nominal

• Zso Impedance Magnitude In Ohms

  221.40 nominal

• Frequency In Hertz

  400.0 nominal

• Rotor Input Voltage Rating In Volts

  26.0 nominal

• Shaft Diameter

  0.1195 inches minimum single shaft and 0.1200 inches maximum

• Undercut Width

  0.0500 inches nominal

• Undercut Diameter

  0.9750 inches minimum and 0.9755 inches maximum

• Flange Thickness

  0.0930 inches nominal

• Flange Diameter

  1.0570 inches minimum and 1.0650 inches maximum

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Body Style

  a3 standard round c