NSN: 5990-00-040-1656
Synchros and Resolvers
SYNCHRO,RECEIVER-TRANSMITTER
- No manufacturer data was found.
SYNCHRO,RECEIVER-TRANSMITTER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Shoulder Diameter
3.3340 inches nominal
-
Pilot Diameter
1.6250 inches nominal
-
Second Shoulder Diameter
3.3750 inches maximum
-
Second Shoulder Length
aa0.3750
-
Overall Length
5.9400 inches maximum
-
Flange Diameter
3.6250 inches maximum
-
Flange Thickness
0.2500 inches nominal
-
Fragility Factor
moderately rugged
-
Maximum Temp Rise
16.0 deg celsius
-
Rotor Input Voltage Rating In Volts
115.0 nominal
-
Zrs Resistance In Ohms
15.10 nominal
-
Rotor Dc Resistance In Ohms
6.80 nominal
-
Stator Dc Resistance In Ohms
4.80 nominal
-
Electrical Error Angular Range In Minutes
m10.0/p10.0
-
Torque Gradient Per Angular Deg
0.900 inch-ounces (ounce-inches)nominal
-
Shaft Maximum Radial Play
a0.0008
-
Pilot Length
0.1600 inches nominal
-
Shoulder Length
0.6500 inches nominal
-
Aft Of Second Flange Diameter
aa3.3340
-
Shaft Thread Direction
right-hand
-
Shaft Thread Class
2a
-
Terminal Location
rear
-
Plus J Zro Reactance In Ohms
155.00 nominal
-
Plus J Zrs Reactance In Ohms
9.50 nominal
-
Body Material
steel,stainless
-
Body Style
standard round double flange a
-
Body Diameter
3.3900 inches maximum
-
Shaft Diameter
0.2405 inches maximum
-
Shaft Length
0.7300 inches maximum
-
Schematic Diagram Designator
one y-rotor,one stator
-
Distance Between Flanges
1.8120 inches nominal
-
Body Size
37
-
Frequency In Hertz
60.0 nominal
-
Rotor Input Current Rating
800.0 milliamperes nominal
-
Rotor Input Electrical Power Rating
7.9 watts nominal
-
Zro Resistance In Ohms
16.40 nominal
-
Zso Resistance In Ohms
8.30 nominal
-
Phase Shift Angle In Deg
2.700 input to output nominal
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
35.00 output
-
Maximum Total Null Voltage Output In Millivolts Per Volt
125.00
-
Spline Tooth Quantity
22
-
Actuator Friction Torque At Plus 25 Deg Celsius
0.50 inch-ounces (ounce-inches)nominal
-
Shaft Radial Play Test Point
ac0.125
-
Shaft End Play
0.0010 inches minimum and 0.0050 inches maximum
-
Mounting Surface To Terminal End Distance
4.0300 inches maximum
-
Spline Tooth Diametral Pitch
96
-
Shaft Maximum Runout
0.0008 inches
-
Shaft Thread Series Designator
unf
-
Shaft Thread Length
0.3200 inches maximum
-
Plus J Zso Reactance In Ohms
76.30 nominal
-
Shaft Type
spline w/threads
-
Transformation Ratio
0.783 rotor to stator nominal
-
Shaft Nominal Thread Size
0.250 inches
-
Unpackaged Unit Weight
7.938 pounds
-
Terminal Type And Quantity
5 screw
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.