NSN: 5990-00-061-9041
Synchros and Resolvers
SYNCHRO,CONTROL TRANSFORMER
- No manufacturer data was found.
SYNCHRO,CONTROL TRANSFORMER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Alignment Hole Bolt Circle Diameter
0.8120 inches nominal
-
Overall Length
2.3420 inches minimum and 2.3740 inches maximum
-
Shaft Type
round, slotted single shaft
-
Mounting Surface To Terminal End Distance
1.7330 inches minimum and 1.7950 inches maximum
-
Plus J Zrs Reactance In Ohms
324.00 nominal
-
Stator Input Voltage Rating In Volts
78.0 nominal
-
Actuator Friction Torque At Minus 55 Deg Celsius
15.0 centimeter-grams nominal
-
Stator Input Electrical Power Rating
250.0 milliwatts nominal
-
Phase Shift Angle In Deg
3.400 input to output nominal
-
Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
-
Shaft Slot Width
0.0310 inches nominal single shaft
-
Pilot Length
0.0620 inches nominal
-
Alignment Hole Depth
0.0310 inches nominal
-
Stator Input Current Rating
17.0 milliamperes nominal
-
Alignment Hole Quantity
4
-
Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
-
Undercut Width
0.0500 inches nominal
-
Plus J Zss Reactance In Ohms
4580.00 nominal
-
Terminal Location
rear
-
Plus J Zro Reactance In Ohms
3194.00 nominal
-
Zro Resistance In Ohms
707.00 nominal
-
Zrs Resistance In Ohms
637.00 nominal
-
Frequency In Hertz
400.0 nominal
-
Electrical Error Angular Range In Minutes
-10.0/+10.0
-
Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams nominal
-
Flange Thickness
0.0930 inches nominal
-
Body Material
steel, stainless
-
Terminal Type And Quantity
5 wire lead
-
Shaft Length
0.5630 inches nominal single shaft
-
Pilot Diameter
0.6245 inches minimum and 0.6252 inches maximum
-
Body Size
11
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
59.00 output
-
Maximum Total Null Voltage Output In Millivolts Per Volt
94.00
-
Flange Diameter
1.0590 inches minimum and 1.0620 inches maximum
-
Rotor Dc Resistance In Ohms
370.00 nominal
-
Transformation Ratio
0.735 rotor to stator nominal
-
Shaft Slot Depth
0.0310 inches nominal single shaft
-
Body Style
standard round b
-
Stator Dc Resistance In Ohms
602.00 nominal
-
Zss Resistance In Ohms
876.00 nominal
-
Fragility Factor
moderately rugged
-
Shoulder Length
0.0620 inches nominal
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.