NSN: 5990-00-067-9998

Technical Characteristics

• Body Style

  a3 standard round c

• Shoulder Diameter

  1.3115 inches minimum and 1.3120 inches maximum

• Overall Length

  2.6460 inches minimum and 2.6660 inches maximum

• Flange Diameter

  1.4340 inches minimum and 1.4370 inches maximum

• Undercut Diameter

  1.3115 inches minimum and 1.3120 inches maximum

• Undercut Width

  0.0750 inches minimum and 0.0810 inches maximum

• Shaft Diameter

  0.1870 inches minimum and 0.1872 inches maximum single shaft

• Shaft Length

  0.5300 inches minimum and 0.5500 inches maximum single shaft

• Stator Input Current Rating

  17.0 milliamperes nominal

• Stator Input Electrical Power Rating

  50.0 milliwatts nominal

• Zso Impedance Magnitude In Ohms

  1025.00 nominal

• Maximum Fundamental Null Voltage In Millivolts Per Volt

  8.00 output

• Interaxis Error Angular Range In Minutes

  -5.0/ 5.0

• Mounting Surface To Terminal End Distance

  1.9160 inches nominal

• Shaft Thread Series Designator

  unf single shaft

• Shaft Thread Direction

  right-hand single shaft

• Shaft Thread Class

  2a single shaft

• Shaft Nominal Thread Size

  0.190 inches single shaft

• Terminal Type And Quantity

  12 screw

• Pilot Diameter

  0.8745 inches minimum and 0.8750 inches maximum

• Flange Thickness

  0.0900 inches minimum and 0.0960 inches maximum

• Securing Hole Quantity

  4

• Body Size

  15

• Stator Input Voltage Rating In Volts

  15.0 nominal

• Frequency In Hertz

  400.0 nominal

• Zso Impedance Angle In Deg

  78.00 nominal

• Phase Shift Angle In Deg

  8.500 input to output nominal

• Maximum Total Null Voltage Output In Millivolts Per Volt

  15.00

• Spline Tooth Quantity

  21 single shaft

• Pilot Length

  0.0370 inches minimum and 0.0430 inches maximum

• Shoulder Length

  0.1290 inches minimum and 0.1350 inches maximum

• Spline Tooth Diametral Pitch

  120 single shaft

• Terminal Location

  rear

• Shaft Thread Length

  0.2000 inches nominal single shaft

• Shaft Type

  spline w/threads single shaft

• Transformation Ratio

  0.980 rotor to stator nominal