NSN: 5990-00-068-4324
Synchros and Resolvers
SYNCHRO,CONTROL TRANSFORMER
- No manufacturer data was found.
SYNCHRO,CONTROL TRANSFORMER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Maximum Temp Rise
10.0 deg celsius
-
Shoulder Diameter
1.3115 inches minimum and 1.3120 inches maximum
-
Alignment Hole Depth
0.1250 inches minimum
-
Shaft Thread Class
2a
-
Shaft Nominal Thread Size
0.190 inches single shaft
-
Shaft Length
0.5400 inches nominal single shaft
-
Alignment Hole Quantity
4
-
Undercut Diameter
1.3120 inches nominal
-
Spline Tooth Diametral Pitch
120 single shaft
-
Pilot Length
0.0400 inches nominal
-
~1
data on certain environmental and performanc
-
Torque Gradient Per Angular Deg
0.050 inch-ounces maximum
-
Overall Length
2.3120 inches nominal
-
Shaft Thread Direction
right-hand single shaft
-
Terminal Location
rear
-
Shaft Diameter
0.1870 inches minimum single shaft and 0.1872 inches maximum single shaft
-
Maximum Total Null Voltage Output In Millivolts Per Volt
60.00
-
Zrs Impedance Angle In Deg
26.00 minimum and 33.00 maximum
-
Stator Input Voltage Rating In Volts
90.0 nominal
-
Terminal Type And Quantity
5 screw
-
Pilot Diameter
0.8745 inches minimum and 0.8750 inches maximum
-
Shoulder Length
0.1320 inches nominal
-
Frequency In Hertz
400.0 nominal
-
Flange Diameter
1.4320 inches minimum and 1.4370 inches maximum
-
Undercut Width
0.0780 inches nominal
-
Shaft Type
spline w/threads single shaft
-
Electrical Error Angular Range In Minutes
-6.0/+6.0
-
Alignment Hole Bolt Circle Diameter
1.1000 inches nominal
-
Shaft Thread Series Designator
unf single shaft
-
Phase Shift Angle In Deg
5.500 input to output maximum
-
Flange Thickness
0.0930 inches nominal
-
Body Material
steel, stainless
-
Shaft Thread Length
0.1850 inches nominal single shaft
-
Specification/standard Data
81349-mil-s-20708/15 government specification
-
Stator Input Current Rating
10.0 milliamperes maximum
-
Zrs Impedance Magnitude In Ohms
1050.00 minimum and 1300.00 maximum
-
Body Size
15
-
Transformation Ratio
0.735 rotor to stator nominal
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
32.00 output
-
Spline Tooth Quantity
21 single shaft
-
Mounting Surface To Terminal End Distance
1.7720 inches nominal
-
Zso Impedance Angle In Deg
77.80 minimum and 84.50 maximum
-
Stator Input Electrical Power Rating
140.0 milliwatts nominal
-
Zso Impedance Magnitude In Ohms
7800.00 minimum and 9512.00 maximum
-
Body Style
standard round c
-
Test Data Document
81349-mil-s-20708 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.