NSN: 5990-00-072-5450
Synchros and Resolvers
SYNCHRO,CONTROL TRANSFORMER
- No manufacturer data was found.
SYNCHRO,CONTROL TRANSFORMER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Shoulder Diameter
0.6950 inches minimum and 0.7050 inches maximum
-
Zso Resistance In Ohms
79.00 nominal
-
Actuator Friction Torque At Plus 25 Deg Celsius
30.0 centimeter-grams nominal
-
Shaft Maximum Runout
0.0020 inches
-
Body Style
standard round, rotatable stator c
-
Shaft Type
round single shaft
-
Plus J Zso Reactance In Ohms
350.00 nominal
-
Plus J Zro Reactance In Ohms
1887.00 nominal
-
Terminal Location
rear
-
Stator Dc Resistance In Ohms
67.00 nominal
-
Maximum Total Null Voltage Output In Millivolts Per Volt
60.00
-
Zrs Resistance In Ohms
548.00 nominal
-
Stator Input Voltage Rating In Volts
11.8 nominal
-
Frequency In Hertz
400.0 nominal
-
Stator Input Current Rating
40.0 milliamperes nominal
-
Stator Input Electrical Power Rating
100.0 milliwatts nominal
-
Pilot Length
0.0380 inches minimum and 0.0480 inches maximum
-
Mounting Surface To Terminal End Distance
2.0000 inches maximum
-
Shaft Radial Play Determining Weight
4.0 ounces
-
Terminal Type And Quantity
5 wire lead
-
Electrical Error Angular Range In Minutes
-7.0/+7.0
-
Overall Length
3.1830 inches maximum
-
Flange Thickness
0.0570 inches minimum and 0.0670 inches maximum
-
Maximum Temp Rise
5.0 deg celsius
-
Shaft End Play
0.0020 inches maximum
-
Body Size
10
-
Schematic Diagram Designator
err-090
-
Shaft Maximum Radial Play
0.0010 inches
-
Phase Shift Angle In Deg
6.000 input to output nominal
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
30.00 output
-
Transformation Ratio
2.159 rotor to stator nominal
-
Plus J Zrs Reactance In Ohms
182.00 nominal
-
Body Material
steel, corrosion resisting
-
Zro Resistance In Ohms
446.00 nominal
-
Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
-
Undercut Width
0.0570 inches minimum
-
Shaft Length
0.7030 inches minimum single shaft and 0.7330 inches maximum single shaft
-
Shaft End Play Determining Weight
8.0 ounces
-
Undercut Diameter
0.7360 inches minimum and 0.7460 inches maximum
-
Rotor Dc Resistance In Ohms
316.00 nominal
-
Actuator Friction Torque At Minus 55 Deg Celsius
20.0 centimeter-grams nominal
-
Shoulder Length
0.0570 inches minimum and 0.0670 inches maximum
-
Flange Diameter
0.9100 inches maximum
-
Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.