NSN: 5990-00-078-3182
Synchros and Resolvers
SYNCHRO,CONTROL TRANSFORMER
- No manufacturer data was found.
SYNCHRO,CONTROL TRANSFORMER
ACT NOW! SUBMIT A QUICK QUOTE.
Technical Characteristics
-
Maximum Fundamental Null Voltage In Millivolts Per Volt
30.00 output
-
Phase Shift Angle In Deg
3.000 input to output nominal
-
Shaft Length
0.3790 inches minimum single shaft and 0.3870 inches maximum single shaft
-
Body Size
18
-
Shaft End Play Determining Weight
16.0 ounces
-
Transformation Ratio
0.735 rotor to stator nominal
-
Spline Tooth Quantity
21 single shaft
-
Body Material
steel, corrosion resisting
-
Shaft Thread Length
0.3550 inches maximum single shaft
-
Body Style
standard round c
-
Rotor Dc Resistance In Ohms
420.00 nominal
-
Shoulder Length
0.1290 nominal mils and 0.1350 nominal centimeters
-
Alignment Hole Bolt Circle Diameter
1.2500 inches nominal
-
Shaft Radial Play Test Point
0.125 inches maximum
-
Maximum Total Null Voltage Output In Millivolts Per Volt
45.00
-
Shaft Nominal Thread Size
0.190 inches single shaft
-
Pilot Diameter
0.9370 inches minimum and 0.9375 inches maximum
-
Alignment Hole Quantity
4
-
Pilot Length
0.0370 nominal mils and 0.0430 nominal centimeters
-
Spline Tooth Diametral Pitch
120 single shaft
-
Shaft Thread Class
2a single shaft
-
Shaft Thread Direction
right-hand single shaft
-
Terminal Location
rear
-
Overall Length
3.0620 inches maximum
-
Stator Dc Resistance In Ohms
675.00 nominal
-
Shaft Diameter
0.1870 inches minimum single shaft and 0.1872 inches maximum single shaft
-
Actuator Friction Torque At Plus 25 Deg Celsius
0.10 inch-ounces maximum
-
Undercut Diameter
1.6220 inches minimum and 1.6280 inches maximum
-
Shaft Maximum Radial Play
0.0008 inches
-
Schematic Diagram Designator
err-090
-
Flange Thickness
0.0900 inches minimum and 0.0960 inches maximum
-
Shaft Radial Play Determining Weight
16.0 ounces
-
Stator Input Voltage Rating In Volts
90.0 nominal
-
Terminal Type And Quantity
5 screw
-
Mounting Surface To Terminal End Distance
2.5230 inches maximum
-
Stator Input Electrical Power Rating
100.0 milliwatts maximum
-
Frequency In Hertz
400.0 nominal
-
Shaft Maximum Runout
0.0008 inches
-
Fragility Factor
moderately rugged
-
Zso Impedance Angle In Deg
88.00 nominal
-
Zso Impedance Magnitude In Ohms
13000.00 nominal
-
Undercut Width
0.0780 inches nominal
-
Shaft Type
spline w/threads single shaft
-
Electrical Error Angular Range In Minutes
-6.0/+6.0
-
Shoulder Diameter
1.5615 inches minimum and 1.5620 inches maximum
-
Stator Input Current Rating
7.0 milliamperes maximum
-
Flange Diameter
1.7470 inches minimum and 1.7500 inches maximum
-
Shaft Thread Series Designator
unf single shaft
-
Shaft End Play
0.0030 inches maximum
-
Alignment Hole Depth
0.1250 inches minimum
Related Parts by Category
No related parts.
Related Manufacturers
No related manufacturers.