NSN: 5990-00-084-1250

Technical Characteristics

• Body Material

  aluminum

• Body Style

  a3 standard round c

• Overall Length

  2.5130 inches maximum

• Flange Diameter

  1.4370 inches maximum

• Shaft Diameter

  0.1873 inches maximum single shaft

• Shaft Length

  0.3750 inches nominal single shaft

• Schematic Diagram Designator

  d1 two rotor, two stator

• Fragility Factor

  moderately rugged

• Stator Input Voltage Rating In Volts

  60.0 nominal

• Stator Dc Resistance In Ohms

  170.00 nominal

• Actuator Friction Torque At Plus 25 Deg Celsius

  1.00 inch-ounces (ounce-inches) maximum

• ~1

  on f and connection r4 position h and connection s1 position a and connection

• ~2

  s2 position d and connection s3 position b and connection s4 position c

• Pilot Length

  0.0400 inches nominal

• Shoulder Length

  0.1320 inches nominal

• Terminal Location

  rear

• Shaft Type

  round, slotted single shaft

• Alignment Hole Bolt Circle Diameter

  1.1000 inches nominal

• Terminal Type And Quantity

  8 screw

• Shoulder Diameter

  1.3120 inches maximum

• Pilot Diameter

  0.8750 inches maximum

• Flange Thickness

  0.0930 inches nominal

• Undercut Diameter

  1.3120 inches nominal

• Undercut Width

  0.0780 inches nominal

• Maximum Temp Rise

  40.0 deg celsius

• Body Size

  15

• Stator Input Current Rating

  not rated

• Stator Input Electrical Power Rating

  not rated

• Frequency In Hertz

  400.0 nominal

• Rotor Dc Resistance In Ohms

  200.00 nominal

• Phase Shift Angle In Deg

  3.500 output to input nominal

• Interaxis Error Angular Range In Minutes

  -5.0/ 5.0

• Output Voltage Functional Error Range In Percent

  -0.1/ 0.1

• Actuator Friction Torque At Minus 55 Deg Celsius

  0.20 inch-ounces (ounce-inches) maximum

• Alignment Hole Quantity

  4

• Terminal Designator And Schematic Position

  connection r1 position e and connection r2 position g and connection r3 positi

• Mounting Surface To Terminal End Distance

  2.0640 inches maximum

• Shaft Slot Depth

  0.0300 inches nominal single shaft

• Shaft Slot Width

  0.0300 inches nominal single shaft

• Alignment Hole Depth

  0.1250 inches maximum

• Transformation Ratio

  0.980 stator to rotor nominal