NSN: 5990-00-085-6327

Technical Characteristics

• Body Material

  any acceptable

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Body Style

  standard round b

• Shoulder Diameter

  0.9995 inches minimum and 1.0000 inches maximum

• Overall Length

  2.1610 inches nominal

• Flange Thickness

  0.0900 inches minimum and 0.0960 inches maximum

• Undercut Width

  0.0500 inches nominal

• Zso Resistance In Ohms

  379.00 nominal

• Zrs Resistance In Ohms

  850.00 nominal

• Phase Shift Angle In Deg

  5.000 input to output minimum

• Actuator Friction Torque At Minus 55 Deg Celsius

  16.00 centimeter-grams (gram-centimeters)nominal

• Torque Gradient Per Angular Deg

  any acceptable

• Alignment Hole Quantity

  4

• Pilot Length

  0.0590 inches minimum and 0.0650 inches maximum

• Shoulder Length

  0.0590 inches minimum and 0.0650 inches maximum

• Plus J Zro Reactance In Ohms

  4400.00 nominal

• Plus J Zso Reactance In Ohms

  2250.00 nominal

• Shaft Slot Width

  0.0300 inches nominal

• Plus J Zrs Reactance In Ohms

  350.00 nominal

• Alignment Hole Depth

  0.0990 inches nominal

• Transformation Ratio

  0.743 stator to rotor minimum and 0.821 stator to rotor maximum

• Special Features

  spur gear mounted on shaft

• Flange Diameter

  1.0570 inches minimum and 1.0650 inches maximum

• Shaft Diameter

  0.1195 inches minimum and 0.1200 inches maximum

• Shaft Length

  0.3670 inches nominal

• Body Size

  11

• Rotor Input Voltage Rating In Volts

  115.0 nominal

• Frequency In Hertz

  400.0 nominal

• Rotor Input Current Rating

  35.0 milliamperes nominal

• Rotor Input Electrical Power Rating

  any acceptable

• Zro Resistance In Ohms

  700.00 nominal

• Rotor Dc Resistance In Ohms

  361.00 minimum and 489.00 maximum

• Stator Dc Resistance In Ohms

  285.00 minimum and 385.00 maximum

• Actuator Friction Torque At Plus 25 Deg Celsius

  4.00 centimeter-grams (gram-centimeters)nominal

• Mounting Surface To Terminal End Distance

  1.7320 inches nominal

• Terminal Location

  rear

• Shaft Slot Depth

  0.0300 inches nominal

• Shaft Type

  round,slotted

• Alignment Hole Bolt Circle Diameter

  0.8090 inches minimum and 0.8150 inches maximum

• Test Data Document

  18876-10619711 drawing

• Terminal Type And Quantity

  5 screw