NSN: 5990-00-107-7156

Technical Characteristics

• Shaft Length

  0.4750 inches minimum single shaft and 0.4950 inches maximum single shaft

• Shaft Radial Play Test Point

  0.250 inches nominal

• Pilot Length

  0.0590 nominal mils and 0.0650 nominal centimeters

• Maximum Total Null Voltage Output In Millivolts Per Volt

  30.00

• Stator Dc Resistance In Ohms

  60.00 nominal

• Body Style

  standard round c

• Overall Length

  2.1660 inches minimum and 2.1860 inches maximum

• Actuator Friction Torque At Minus 55 Deg Celsius

  40.00 centimeter-grams nominal

• Undercut Diameter

  0.9700 inches minimum and 0.9800 inches maximum

• Pilot Diameter

  0.6245 inches minimum and 0.6250 inches maximum

• Flange Thickness

  0.0930 inches nominal

• Body Material

  steel, stainless

• Terminal Location

  rear

• Transformation Ratio

  0.850 rotor to stator nominal

• Zso Impedance Magnitude In Ohms

  283.50 minimum and 346.50 maximum

• Stator Input Voltage Rating In Volts

  11.8 nominal

• Maximum Fundamental Null Voltage In Millivolts Per Volt

  10.00 output

• Rotor Dc Resistance In Ohms

  40.00 nominal

• Shaft Type

  round, slotted single shaft

• Frequency In Hertz

  400.0 nominal

• Electrical Error Angular Range In Minutes

  -5.5/+5.5

• Terminal Type And Quantity

  6 wire lead

• Shaft Diameter

  0.1870 inches minimum single shaft and 0.1873 inches maximum single shaft

• Shaft Radial Play Determining Weight

  4.0 ounces

• Undercut Width

  0.0620 inches nominal

• Shaft End Play

  0.0015 inches maximum

• Shaft Slot Width

  0.0260 inches minimum single shaft and 0.0360 inches maximum single shaft

• Actuator Friction Torque At Plus 25 Deg Celsius

  20.00 centimeter-grams nominal

• Shaft Maximum Radial Play

  0.0008 inches

• Body Size

  11

• Shaft End Play Determining Weight

  8.0 ounces

• Fragility Factor

  moderately rugged

• Zro Impedance Angle In Deg

  77.00 minimum and 83.00 maximum

• Phase Shift Angle In Deg

  5.000 input to output nominal

• Flange Diameter

  1.0570 inches minimum and 1.0650 inches maximum

• Shoulder Length

  0.0590 nominal mils and 0.0650 nominal centimeters

• Shoulder Diameter

  0.9995 inches minimum and 1.0000 inches maximum

• Mounting Surface To Terminal End Distance

  1.6910 inches maximum

• Shaft Maximum Runout

  0.0010 inches

• Zro Impedance Magnitude In Ohms

  364.50 minimum and 445.50 maximum

• Shaft Slot Depth

  0.0260 inches minimum single shaft and 0.0360 inches maximum single shaft

• Zso Impedance Angle In Deg

  79.00 minimum and 85.00 maximum