NSN: 5905-00-255-6144

Technical Characteristics

• Actuator Travel Control Feature

  stops

• Fragility Factor

  moderately rugged

• Maximum Stop Torque

  128.00 inch-ounces

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Body Style

  cylindrical bushing mounted

• Body Diameter

  0.890 inches minimum and 0.125 inches minimum and 0.150 inches maximum

• Mounting Method

  standard bushing and unthreaded hole

• Nonturn Device Radius

  0.422 inches minimum and 0.454 inches maximum

• Maximum Running Torque

  6.00 inch-ounces

• Shaft Bearing Type

  sleeve

• Shaft Style

  round, slotted, undercut

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  120.0 single section

• Terminal Type And Quantity

  3 tab, solder lug

• Mounting Bushing Length

  0.359 inches minimum and 0.391 inches maximum

• Electrical Resistance Per Section

  100.0 kilohms single section

• Maximum Starting Torque

  6.00 inch-ounces

• Shaft Length

  0.880 inches minimum and 0.940 inches maximum

• Body Length

  0.437 inches minimum and 0.469 inches maximum

• Shaft Diameter

  0.232 inches minimum and 0.234 inches maximum

• Actuator Type

  single shaft

• Rotary Actuator Travel In Angular Deg

  251.0 minimum and 318.0 maximum

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unef

• Special Features

  resistor shielded by three steel plates 1.125 in. maximum by 1.060 in. nominal

• Mounting Facility Quantity

  2

• Nonturn Device Location

  at 9 oclock

• Screw Thread Quantity Per Inch

  32.0

• Section Quantity

  1

• Cubic Measure

  0.292 cubic inches

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  70.0 single section

• Effective Electrical Rotation In Deg Angular Rotation

  251.0 minimum and 318.0 maximum

• Features Provided

  humidity proof

• Resistance Tolerance Per Section In Percent

  -10.0/+10.0 single section

• Terminal Location

  radially positioned over less than half the circumference

• Screw Thread Diameter

  0.359 inches minimum and 0.391 inches maximum

• Standard Taper Curve Per Section

  a single section

• Resistance Temp Characteristic Range Per Section In Percent

  -5.0/+10.0 25 deg celsius single section and -5.0/+10.0 -25 deg celsius single section and -3.0/+0.0 -55 deg celsius single section and +0.0/+3.0 120 deg celsius single section