NSN: 5905-00-864-5535

Technical Characteristics

• Fixed Tap Quantity Per Section

  3 single section

• Effective Electrical Rotation In Deg Angular Rotation

  350.0 nominal

• Electrical Resistance Per Section

  38.88 kilohms single section

• Pilot Diameter Runout

  0.001 inches

• Shaft Style

  round

• Lateral Runout

  0.002 inches

• Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation

  170.0 single section and 80.0 single section and 260.0 single section

• Body Length

  0.666 inches maximum

• Reliability Indicator

  not established

• Screw Thread Series Designator

  unc

• Undercut Diameter

  0.7495 inches minimum and 0.7500 inches maximum

• Function Conformity Tolerance Per Section

  -0.50/+0.50 single section

• Actuator Travel Control Feature

  continuous motion

• Pilot Diameter

  0.7495 inches minimum and 0.7500 inches maximum

• Tap Location Tolerance Per Section

  -5.0/+5.0 deg angular rotation single section

• Angle Of Mounting Hole In Deg

  90.0

• Ambient Temp In Deg Celsius Per Section At Full Rated Power

  85.0 single section

• Test Data Document

  89954-892c796 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

• Maximum Running Torque

  0.10 inch-ounces

• Body Diameter

  0.870 inches minimum and 0.880 inches maximum

• Shaft Length

  0.920 inches minimum and 0.980 inches maximum

• Angle Between Centerlines Of Mounting Holes In Deg

  90.0

• Shaft Radial Play

  0.0007 inches

• Mounting Hole/stud Circle Diameter

  0.560 inches minimum and 0.565 inches maximum

• Resistance Tolerance Per Section In Percent

  -1.0/+1.0 single section

• Body Style

  cylindrical servo mounted

• Rotary Actuator Travel In Angular Deg

  360.0 nominal

• Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power

  105.0 single section

• Mounting Lip Depth

  0.0570 inches minimum and 0.0670 inches maximum

• Terminal Location

  radially positioned over less than half the circumference

• Mounting Facility Quantity

  4

• Mounting Lip Diameter

  0.8700 inches minimum and 0.8800 inches maximum

• Terminal Type And Quantity

  6 solder stud

• Shaft Runout

  0.001 inches

• Pilot Length

  0.0570 inches minimum and 0.0670 inches maximum

• Function Characteristic Per Section

  single section linear

• Section Quantity

  1

• Shaft Diameter

  0.1246 inches minimum and 0.1248 inches maximum

• Mounting Method

  clamp ring and threaded hole

• Power Dissipation Rating Per Section In Watts

  2.0 free air single section

• Actuator Type

  double ended shaft

• Maximum Starting Torque

  0.10 inch-ounces

• Function Conformity Per Section

  single section independent linearity

• Shaft Bearing Type

  bearing

• Screw Thread Diameter

  0.086 inches nominal

• Screw Thread Quantity Per Inch

  56.0

• Undercut Width

  0.0570 inches minimum and 0.0670 inches maximum